Replacing Lock on uPVC Door
If you are looking to replace the lock on your door made of upvc it is necessary to remove the handle and screw holes. This is typically easy to do.
The next step is to locate the screw which holds the lock barrel in place. It is usually colored differently than the other screws, and is situated on the outside of the faceplate of the lock.
Take the Cylinder off
The first step to change the lock on a door made of upvc is to take off the current lock cylinder from the door. This is a fairly simple procedure that can be done in about 30 minutes. All you need is an screwdriver. The Euro Cylinder screw is typically located on the inside of the door, next to the lock cylinder. The screw should be easy to identify since it's usually different in colour from the other screws. Take it off and put it away in a safe location.
After you have removed the cylinder, you can begin to remove the handle. To accomplish this, you'll have to open the door wide enough that you can see the inside edge of the door and the faceplate on the outside of the lock.
Take off the screw that connects the handle to the door with a screwdriver. After the screw is removed, you can pull the handle towards you and the rest out of the door.
If you're having difficulty getting the handle off, you may need to take off the screw that is holding it to the stud inside the door frame. This can be accomplished with a screwdriver or drill and you'll need be careful not to damage the screw head or cross-thread it.
If you're ready to replace the cylinder, ensure that it is the right size for your door. Cylinders are measured based on two measurement points: (a) the distance from the middle of the Fixing Screw hole to the bottom of the cylinder, and (b) the distance between the keyhole and the edge of the lock plate.
Remove the Handle
If your door handle made of upvc becomes stiff, loose or floppy, the good news is that this is a relatively simple issue to fix. The multipoint lock cylinder or other internal parts within the door, between the handle and frame, are often the cause. It is not uncommon for upvc locks to wear out due to the weather, heavy usage or simply aging. This can cause problems with the locking or closing mechanism of the door.
The cylinder could wear out and make it difficult to turn the key. The lock could also become stiff causing the handle to drop. The cylinder can be easily replaced, and it is a simple process. It is possible to complete this yourself, though some understanding of how the mechanism works is required. You'll have to remove the handle to be able to replace the cylinder.
To accomplish this, you will need an screwdriver and tape measure. It is crucial to know the exact dimensions of your existing cylinder to ensure that you order a replacement cylinder that fits. The cylinder is the component that lets you lock your upvc door. Therefore, it is essential to ensure that you get an identical replacement size.
To take out the old cylinder, you will have to unscrew the screws that are holding it. Be careful not to strip the screws, as this could make it very difficult to remove them again in the future. After the screws have been removed, the cylinder should be easy to remove.
Remove the Lock Barrel
Upvc is a very durable material, designed to ensure that you and your family are secure. They are available in different styles and colours to suit any style. They are also maintenance-free, and thermally efficient. However, they're not without their disadvantages. Over time the barrel or locking point lock can become faulty and require replacement. It is a simple procedure however, you must be aware of a few things prior to beginning.
You'll have to take off the door handle to reach the screw that holds the lock cylinder in place. It's typically colored differently from the rest of the screws and can be found near the edge of the door, close to where the keyhole is located. Remove the screw and place it in a safe place. Slide the handles off both the outside and inside of the door. Do not rush because this could cause damage to the uPVC.
Once you have removed the handles, use a screwdriver to detach the screws that hold them to the frame of the door. repair window locks upvc will give you better access to the pins that hold the cylinder in place. You can then try to pull and wiggle the cylinder to see if this can loosen it. When it is loose, pull it towards you, and then pull it out of the socket.
After you have removed the old lock cylinder, it is important to replace with a new one which is anti-snap and anti-bump. You can do this yourself if have the right tools, or you can hire a professional locksmith to complete it for you. This is a simple task that shouldn't take more than five minutes.
Install the New Cylinder
A upvc lock can be damaged or broken in a variety of different ways. For example the cylinder could be damaged or may no longer work as it should. Whatever the reason for replacing your upvc lock, it is important that you choose the right size replacement. This is because if an wrong one is installed, it could lead to your upvc door being more vulnerable to a process known as 'lock snapping', which is responsible for 25 per cent of burglaries.
It is important to install the proper cylinder. The procedure is simple and takes less than five minutes. You will require a screwdriver to take off the screws that are connected to the handle faceplate and the cylinder, but once the removal is completed it's a simple task to switch them.
Before you get started, make sure that the handle is open and that you have full access to the inside edging of the door as well as the side of the handle faceplate which holds the lock cylinder. This will enable you to easily remove the lock cylinder from the handle without having to move it and expose the internal components of the frame.
The next step is to remove the old cylinder and measure it, you will need to determine the length of the cylinder and the diameter of the cam, which is used to lock and unlock the door. This will help you locate a replacement that is the same size or even smaller, which is the most important part of the whole procedure. A cylinder must be flush with the backplate of the handle and be no more than 5mm away from it.
Install the Handle
It is not uncommon for a upvc door lock to jam and this can be caused by something breaking inside the case that controls the bolts that retract into the keep or strike plate. This is usually fixed by altering the Allan key underneath the hinges. However, this could cause stress on parts inside the central casing, and it is advised to contact a professional.
It is crucial to have easy and quick access to both sides when you are changing the handle. Additionally, it is crucial to use the correct tools. It is also an excellent idea to prop the door open so it doesn't close during this process.
The first step is to loosen the screws that hold the handle in place with the help of a screwdriver. Once the screws have been loosen you can take off the handle. After taking off the cylinder and the handle, it's now time to install the replacement handle. Make sure the new handle is the right size for the cylinder you have currently and hole in the center. Check the length of the spindle on the lever that you are currently using to determine this. Also make sure that the screw fixing centres on the handle are the same as the screw fixing centres on your existing hole centre and cylinder.
The replacement handles offered by Fab and Fixed are available in a range of styles and are made to last. These handles are ideal for those who wish to improve their upvc handle and improve home security. The right handle will ensure that your house is safe and secure and will not be a target for burglars to gain entry.